Contract Address Details

/**
 *Submitted for verification at BscScan.com on 2021-12-13
 */

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
  function _msgSender() internal view virtual returns (address payable) {
    return msg.sender;
  }

  function _msgData() internal view virtual returns (bytes memory) {
    this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
    return msg.data;
  }
}

// File @openzeppelin/contracts/token/ERC20/IERC20.sol@v3.4.2

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
  /**
   * @dev Returns the amount of tokens in existence.
   */
  function totalSupply() external view returns (uint256);

  /**
   * @dev Returns the amount of tokens owned by `account`.
   */
  function balanceOf(address account) external view returns (uint256);

  /**
   * @dev Moves `amount` tokens from the caller's account to `recipient`.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transfer(address recipient, uint256 amount) external returns (bool);

  /**
   * @dev Returns the remaining number of tokens that `spender` will be
   * allowed to spend on behalf of `owner` through {transferFrom}. This is
   * zero by default.
   *
   * This value changes when {approve} or {transferFrom} are called.
   */
  function allowance(address owner, address spender) external view returns (uint256);

  /**
   * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * IMPORTANT: Beware that changing an allowance with this method brings the risk
   * that someone may use both the old and the new allowance by unfortunate
   * transaction ordering. One possible solution to mitigate this race
   * condition is to first reduce the spender's allowance to 0 and set the
   * desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   *
   * Emits an {Approval} event.
   */
  function approve(address spender, uint256 amount) external returns (bool);

  /**
   * @dev Moves `amount` tokens from `sender` to `recipient` using the
   * allowance mechanism. `amount` is then deducted from the caller's
   * allowance.
   *
   * Returns a boolean value indicating whether the operation succeeded.
   *
   * Emits a {Transfer} event.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) external returns (bool);

  /**
   * @dev Emitted when `value` tokens are moved from one account (`from`) to
   * another (`to`).
   *
   * Note that `value` may be zero.
   */
  event Transfer(address indexed from, address indexed to, uint256 value);

  /**
   * @dev Emitted when the allowance of a `spender` for an `owner` is set by
   * a call to {approve}. `value` is the new allowance.
   */
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File @openzeppelin/contracts/math/SafeMath.sol@v3.4.2

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
  /**
   * @dev Returns the addition of two unsigned integers, with an overflow flag.
   *
   * _Available since v3.4._
   */
  function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    uint256 c = a + b;
    if (c < a) return (false, 0);
    return (true, c);
  }

  /**
   * @dev Returns the substraction of two unsigned integers, with an overflow flag.
   *
   * _Available since v3.4._
   */
  function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    if (b > a) return (false, 0);
    return (true, a - b);
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
   *
   * _Available since v3.4._
   */
  function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
    // benefit is lost if 'b' is also tested.
    // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
    if (a == 0) return (true, 0);
    uint256 c = a * b;
    if (c / a != b) return (false, 0);
    return (true, c);
  }

  /**
   * @dev Returns the division of two unsigned integers, with a division by zero flag.
   *
   * _Available since v3.4._
   */
  function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    if (b == 0) return (false, 0);
    return (true, a / b);
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
   *
   * _Available since v3.4._
   */
  function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
    if (b == 0) return (false, 0);
    return (true, a % b);
  }

  /**
   * @dev Returns the addition of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `+` operator.
   *
   * Requirements:
   *
   * - Addition cannot overflow.
   */
  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    require(c >= a, 'SafeMath: addition overflow');
    return c;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting on
   * overflow (when the result is negative).
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b <= a, 'SafeMath: subtraction overflow');
    return a - b;
  }

  /**
   * @dev Returns the multiplication of two unsigned integers, reverting on
   * overflow.
   *
   * Counterpart to Solidity's `*` operator.
   *
   * Requirements:
   *
   * - Multiplication cannot overflow.
   */
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0) return 0;
    uint256 c = a * b;
    require(c / a == b, 'SafeMath: multiplication overflow');
    return c;
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting on
   * division by zero. The result is rounded towards zero.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b > 0, 'SafeMath: division by zero');
    return a / b;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * reverting when dividing by zero.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function mod(uint256 a, uint256 b) internal pure returns (uint256) {
    require(b > 0, 'SafeMath: modulo by zero');
    return a % b;
  }

  /**
   * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
   * overflow (when the result is negative).
   *
   * CAUTION: This function is deprecated because it requires allocating memory for the error
   * message unnecessarily. For custom revert reasons use {trySub}.
   *
   * Counterpart to Solidity's `-` operator.
   *
   * Requirements:
   *
   * - Subtraction cannot overflow.
   */
  function sub(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b <= a, errorMessage);
    return a - b;
  }

  /**
   * @dev Returns the integer division of two unsigned integers, reverting with custom message on
   * division by zero. The result is rounded towards zero.
   *
   * CAUTION: This function is deprecated because it requires allocating memory for the error
   * message unnecessarily. For custom revert reasons use {tryDiv}.
   *
   * Counterpart to Solidity's `/` operator. Note: this function uses a
   * `revert` opcode (which leaves remaining gas untouched) while Solidity
   * uses an invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function div(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b > 0, errorMessage);
    return a / b;
  }

  /**
   * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
   * reverting with custom message when dividing by zero.
   *
   * CAUTION: This function is deprecated because it requires allocating memory for the error
   * message unnecessarily. For custom revert reasons use {tryMod}.
   *
   * Counterpart to Solidity's `%` operator. This function uses a `revert`
   * opcode (which leaves remaining gas untouched) while Solidity uses an
   * invalid opcode to revert (consuming all remaining gas).
   *
   * Requirements:
   *
   * - The divisor cannot be zero.
   */
  function mod(
    uint256 a,
    uint256 b,
    string memory errorMessage
  ) internal pure returns (uint256) {
    require(b > 0, errorMessage);
    return a % b;
  }
}

// File @openzeppelin/contracts/token/ERC20/ERC20.sol@v3.4.2

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
  using SafeMath for uint256;

  mapping(address => uint256) private _balances;

  mapping(address => mapping(address => uint256)) private _allowances;

  uint256 private _totalSupply;

  string private _name;
  string private _symbol;
  uint8 private _decimals;

  /**
   * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
   * a default value of 18.
   *
   * To select a different value for {decimals}, use {_setupDecimals}.
   *
   * All three of these values are immutable: they can only be set once during
   * construction.
   */
  constructor(string memory name_, string memory symbol_) public {
    _name = name_;
    _symbol = symbol_;
    _decimals = 18;
  }

  /**
   * @dev Returns the name of the token.
   */
  function name() public view virtual returns (string memory) {
    return _name;
  }

  /**
   * @dev Returns the symbol of the token, usually a shorter version of the
   * name.
   */
  function symbol() public view virtual returns (string memory) {
    return _symbol;
  }

  /**
   * @dev Returns the number of decimals used to get its user representation.
   * For example, if `decimals` equals `2`, a balance of `505` tokens should
   * be displayed to a user as `5,05` (`505 / 10 ** 2`).
   *
   * Tokens usually opt for a value of 18, imitating the relationship between
   * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
   * called.
   *
   * NOTE: This information is only used for _display_ purposes: it in
   * no way affects any of the arithmetic of the contract, including
   * {IERC20-balanceOf} and {IERC20-transfer}.
   */
  function decimals() public view virtual returns (uint8) {
    return _decimals;
  }

  /**
   * @dev See {IERC20-totalSupply}.
   */
  function totalSupply() public view virtual override returns (uint256) {
    return _totalSupply;
  }

  /**
   * @dev See {IERC20-balanceOf}.
   */
  function balanceOf(address account) public view virtual override returns (uint256) {
    return _balances[account];
  }

  /**
   * @dev See {IERC20-transfer}.
   *
   * Requirements:
   *
   * - `recipient` cannot be the zero address.
   * - the caller must have a balance of at least `amount`.
   */
  function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
    _transfer(_msgSender(), recipient, amount);
    return true;
  }

  /**
   * @dev See {IERC20-allowance}.
   */
  function allowance(address owner, address spender)
    public
    view
    virtual
    override
    returns (uint256)
  {
    return _allowances[owner][spender];
  }

  /**
   * @dev See {IERC20-approve}.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function approve(address spender, uint256 amount) public virtual override returns (bool) {
    _approve(_msgSender(), spender, amount);
    return true;
  }

  /**
   * @dev See {IERC20-transferFrom}.
   *
   * Emits an {Approval} event indicating the updated allowance. This is not
   * required by the EIP. See the note at the beginning of {ERC20}.
   *
   * Requirements:
   *
   * - `sender` and `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   * - the caller must have allowance for ``sender``'s tokens of at least
   * `amount`.
   */
  function transferFrom(
    address sender,
    address recipient,
    uint256 amount
  ) public virtual override returns (bool) {
    _transfer(sender, recipient, amount);
    _approve(
      sender,
      _msgSender(),
      _allowances[sender][_msgSender()].sub(amount, 'ERC20: transfer amount exceeds allowance')
    );
    return true;
  }

  /**
   * @dev Atomically increases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   */
  function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
    _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
    return true;
  }

  /**
   * @dev Atomically decreases the allowance granted to `spender` by the caller.
   *
   * This is an alternative to {approve} that can be used as a mitigation for
   * problems described in {IERC20-approve}.
   *
   * Emits an {Approval} event indicating the updated allowance.
   *
   * Requirements:
   *
   * - `spender` cannot be the zero address.
   * - `spender` must have allowance for the caller of at least
   * `subtractedValue`.
   */
  function decreaseAllowance(address spender, uint256 subtractedValue)
    public
    virtual
    returns (bool)
  {
    _approve(
      _msgSender(),
      spender,
      _allowances[_msgSender()][spender].sub(
        subtractedValue,
        'ERC20: decreased allowance below zero'
      )
    );
    return true;
  }

  /**
   * @dev Moves tokens `amount` from `sender` to `recipient`.
   *
   * This is internal function is equivalent to {transfer}, and can be used to
   * e.g. implement automatic token fees, slashing mechanisms, etc.
   *
   * Emits a {Transfer} event.
   *
   * Requirements:
   *
   * - `sender` cannot be the zero address.
   * - `recipient` cannot be the zero address.
   * - `sender` must have a balance of at least `amount`.
   */
  function _transfer(
    address sender,
    address recipient,
    uint256 amount
  ) internal virtual {
    require(sender != address(0), 'ERC20: transfer from the zero address');
    require(recipient != address(0), 'ERC20: transfer to the zero address');

    _beforeTokenTransfer(sender, recipient, amount);

    _balances[sender] = _balances[sender].sub(amount, 'ERC20: transfer amount exceeds balance');
    _balances[recipient] = _balances[recipient].add(amount);
    emit Transfer(sender, recipient, amount);
  }

  /** @dev Creates `amount` tokens and assigns them to `account`, increasing
   * the total supply.
   *
   * Emits a {Transfer} event with `from` set to the zero address.
   *
   * Requirements:
   *
   * - `to` cannot be the zero address.
   */
  function _mint(address account, uint256 amount) internal virtual {
    require(account != address(0), 'ERC20: mint to the zero address');

    _beforeTokenTransfer(address(0), account, amount);

    _totalSupply = _totalSupply.add(amount);
    _balances[account] = _balances[account].add(amount);
    emit Transfer(address(0), account, amount);
  }

  /**
   * @dev Destroys `amount` tokens from `account`, reducing the
   * total supply.
   *
   * Emits a {Transfer} event with `to` set to the zero address.
   *
   * Requirements:
   *
   * - `account` cannot be the zero address.
   * - `account` must have at least `amount` tokens.
   */
  function _burn(address account, uint256 amount) internal virtual {
    require(account != address(0), 'ERC20: burn from the zero address');

    _beforeTokenTransfer(account, address(0), amount);

    _balances[account] = _balances[account].sub(amount, 'ERC20: burn amount exceeds balance');
    _totalSupply = _totalSupply.sub(amount);
    emit Transfer(account, address(0), amount);
  }

  /**
   * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
   *
   * This internal function is equivalent to `approve`, and can be used to
   * e.g. set automatic allowances for certain subsystems, etc.
   *
   * Emits an {Approval} event.
   *
   * Requirements:
   *
   * - `owner` cannot be the zero address.
   * - `spender` cannot be the zero address.
   */
  function _approve(
    address owner,
    address spender,
    uint256 amount
  ) internal virtual {
    require(owner != address(0), 'ERC20: approve from the zero address');
    require(spender != address(0), 'ERC20: approve to the zero address');

    _allowances[owner][spender] = amount;
    emit Approval(owner, spender, amount);
  }

  /**
   * @dev Sets {decimals} to a value other than the default one of 18.
   *
   * WARNING: This function should only be called from the constructor. Most
   * applications that interact with token contracts will not expect
   * {decimals} to ever change, and may work incorrectly if it does.
   */
  function _setupDecimals(uint8 decimals_) internal virtual {
    _decimals = decimals_;
  }

  /**
   * @dev Hook that is called before any transfer of tokens. This includes
   * minting and burning.
   *
   * Calling conditions:
   *
   * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
   * will be to transferred to `to`.
   * - when `from` is zero, `amount` tokens will be minted for `to`.
   * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
   * - `from` and `to` are never both zero.
   *
   * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
   */
  function _beforeTokenTransfer(
    address from,
    address to,
    uint256 amount
  ) internal virtual {}
}

// File @openzeppelin/contracts/utils/Address.sol@v3.4.2

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
  /**
   * @dev Returns true if `account` is a contract.
   *
   * [IMPORTANT]
   * ====
   * It is unsafe to assume that an address for which this function returns
   * false is an externally-owned account (EOA) and not a contract.
   *
   * Among others, `isContract` will return false for the following
   * types of addresses:
   *
   *  - an externally-owned account
   *  - a contract in construction
   *  - an address where a contract will be created
   *  - an address where a contract lived, but was destroyed
   * ====
   */
  function isContract(address account) internal view returns (bool) {
    // This method relies on extcodesize, which returns 0 for contracts in
    // construction, since the code is only stored at the end of the
    // constructor execution.

    uint256 size;
    // solhint-disable-next-line no-inline-assembly
    assembly {
      size := extcodesize(account)
    }
    return size > 0;
  }

  /**
   * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
   * `recipient`, forwarding all available gas and reverting on errors.
   *
   * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
   * of certain opcodes, possibly making contracts go over the 2300 gas limit
   * imposed by `transfer`, making them unable to receive funds via
   * `transfer`. {sendValue} removes this limitation.
   *
   * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
   *
   * IMPORTANT: because control is transferred to `recipient`, care must be
   * taken to not create reentrancy vulnerabilities. Consider using
   * {ReentrancyGuard} or the
   * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
   */
  function sendValue(address payable recipient, uint256 amount) internal {
    require(address(this).balance >= amount, 'Address: insufficient balance');

    // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
    (bool success, ) = recipient.call{value: amount}('');
    require(success, 'Address: unable to send value, recipient may have reverted');
  }

  /**
   * @dev Performs a Solidity function call using a low level `call`. A
   * plain`call` is an unsafe replacement for a function call: use this
   * function instead.
   *
   * If `target` reverts with a revert reason, it is bubbled up by this
   * function (like regular Solidity function calls).
   *
   * Returns the raw returned data. To convert to the expected return value,
   * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
   *
   * Requirements:
   *
   * - `target` must be a contract.
   * - calling `target` with `data` must not revert.
   *
   * _Available since v3.1._
   */
  function functionCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionCall(target, data, 'Address: low-level call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
   * `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, 0, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but also transferring `value` wei to `target`.
   *
   * Requirements:
   *
   * - the calling contract must have an ETH balance of at least `value`.
   * - the called Solidity function must be `payable`.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value
  ) internal returns (bytes memory) {
    return functionCallWithValue(target, data, value, 'Address: low-level call with value failed');
  }

  /**
   * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
   * with `errorMessage` as a fallback revert reason when `target` reverts.
   *
   * _Available since v3.1._
   */
  function functionCallWithValue(
    address target,
    bytes memory data,
    uint256 value,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(address(this).balance >= value, 'Address: insufficient balance for call');
    require(isContract(target), 'Address: call to non-contract');

    // solhint-disable-next-line avoid-low-level-calls
    (bool success, bytes memory returndata) = target.call{value: value}(data);
    return _verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(address target, bytes memory data)
    internal
    view
    returns (bytes memory)
  {
    return functionStaticCall(target, data, 'Address: low-level static call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a static call.
   *
   * _Available since v3.3._
   */
  function functionStaticCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal view returns (bytes memory) {
    require(isContract(target), 'Address: static call to non-contract');

    // solhint-disable-next-line avoid-low-level-calls
    (bool success, bytes memory returndata) = target.staticcall(data);
    return _verifyCallResult(success, returndata, errorMessage);
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
    return functionDelegateCall(target, data, 'Address: low-level delegate call failed');
  }

  /**
   * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
   * but performing a delegate call.
   *
   * _Available since v3.4._
   */
  function functionDelegateCall(
    address target,
    bytes memory data,
    string memory errorMessage
  ) internal returns (bytes memory) {
    require(isContract(target), 'Address: delegate call to non-contract');

    // solhint-disable-next-line avoid-low-level-calls
    (bool success, bytes memory returndata) = target.delegatecall(data);
    return _verifyCallResult(success, returndata, errorMessage);
  }

  function _verifyCallResult(
    bool success,
    bytes memory returndata,
    string memory errorMessage
  ) private pure returns (bytes memory) {
    if (success) {
      return returndata;
    } else {
      // Look for revert reason and bubble it up if present
      if (returndata.length > 0) {
        // The easiest way to bubble the revert reason is using memory via assembly

        // solhint-disable-next-line no-inline-assembly
        assembly {
          let returndata_size := mload(returndata)
          revert(add(32, returndata), returndata_size)
        }
      } else {
        revert(errorMessage);
      }
    }
  }
}

// File @openzeppelin/contracts/token/ERC20/SafeERC20.sol@v3.4.2

pragma solidity >=0.6.0 <0.8.0;

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
  using SafeMath for uint256;
  using Address for address;

  function safeTransfer(
    IERC20 token,
    address to,
    uint256 value
  ) internal {
    _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
  }

  function safeTransferFrom(
    IERC20 token,
    address from,
    address to,
    uint256 value
  ) internal {
    _callOptionalReturn(
      token,
      abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
    );
  }

  /**
   * @dev Deprecated. This function has issues similar to the ones found in
   * {IERC20-approve}, and its usage is discouraged.
   *
   * Whenever possible, use {safeIncreaseAllowance} and
   * {safeDecreaseAllowance} instead.
   */
  function safeApprove(
    IERC20 token,
    address spender,
    uint256 value
  ) internal {
    // safeApprove should only be called when setting an initial allowance,
    // or when resetting it to zero. To increase and decrease it, use
    // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
    // solhint-disable-next-line max-line-length
    require(
      (value == 0) || (token.allowance(address(this), spender) == 0),
      'SafeERC20: approve from non-zero to non-zero allowance'
    );
    _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
  }

  function safeIncreaseAllowance(
    IERC20 token,
    address spender,
    uint256 value
  ) internal {
    uint256 newAllowance = token.allowance(address(this), spender).add(value);
    _callOptionalReturn(
      token,
      abi.encodeWithSelector(token.approve.selector, spender, newAllowance)
    );
  }

  function safeDecreaseAllowance(
    IERC20 token,
    address spender,
    uint256 value
  ) internal {
    uint256 newAllowance = token.allowance(address(this), spender).sub(
      value,
      'SafeERC20: decreased allowance below zero'
    );
    _callOptionalReturn(
      token,
      abi.encodeWithSelector(token.approve.selector, spender, newAllowance)
    );
  }

  /**
   * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
   * on the return value: the return value is optional (but if data is returned, it must not be false).
   * @param token The token targeted by the call.
   * @param data The call data (encoded using abi.encode or one of its variants).
   */
  function _callOptionalReturn(IERC20 token, bytes memory data) private {
    // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
    // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
    // the target address contains contract code and also asserts for success in the low-level call.

    bytes memory returndata = address(token).functionCall(data, 'SafeERC20: low-level call failed');
    if (returndata.length > 0) {
      // Return data is optional
      // solhint-disable-next-line max-line-length
      require(abi.decode(returndata, (bool)), 'SafeERC20: ERC20 operation did not succeed');
    }
  }
}

// File @openzeppelin/contracts/access/Ownable.sol@v3.4.2

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
  address private _owner;

  event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

  /**
   * @dev Initializes the contract setting the deployer as the initial owner.
   */
  constructor() internal {
    address msgSender = _msgSender();
    _owner = msgSender;
    emit OwnershipTransferred(address(0), msgSender);
  }

  /**
   * @dev Returns the address of the current owner.
   */
  function owner() public view virtual returns (address) {
    return _owner;
  }

  /**
   * @dev Throws if called by any account other than the owner.
   */
  modifier onlyOwner() {
    require(owner() == _msgSender(), 'Ownable: caller is not the owner');
    _;
  }

  /**
   * @dev Leaves the contract without owner. It will not be possible to call
   * `onlyOwner` functions anymore. Can only be called by the current owner.
   *
   * NOTE: Renouncing ownership will leave the contract without an owner,
   * thereby removing any functionality that is only available to the owner.
   */
  function renounceOwnership() public virtual onlyOwner {
    emit OwnershipTransferred(_owner, address(0));
    _owner = address(0);
  }

  /**
   * @dev Transfers ownership of the contract to a new account (`newOwner`).
   * Can only be called by the current owner.
   */
  function transferOwnership(address newOwner) public virtual onlyOwner {
    require(newOwner != address(0), 'Ownable: new owner is the zero address');
    emit OwnershipTransferred(_owner, newOwner);
    _owner = newOwner;
  }
}

// File @openzeppelin/contracts/utils/ReentrancyGuard.sol@v3.4.2

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
  // Booleans are more expensive than uint256 or any type that takes up a full
  // word because each write operation emits an extra SLOAD to first read the
  // slot's contents, replace the bits taken up by the boolean, and then write
  // back. This is the compiler's defense against contract upgrades and
  // pointer aliasing, and it cannot be disabled.

  // The values being non-zero value makes deployment a bit more expensive,
  // but in exchange the refund on every call to nonReentrant will be lower in
  // amount. Since refunds are capped to a percentage of the total
  // transaction's gas, it is best to keep them low in cases like this one, to
  // increase the likelihood of the full refund coming into effect.
  uint256 private constant _NOT_ENTERED = 1;
  uint256 private constant _ENTERED = 2;

  uint256 private _status;

  constructor() internal {
    _status = _NOT_ENTERED;
  }

  /**
   * @dev Prevents a contract from calling itself, directly or indirectly.
   * Calling a `nonReentrant` function from another `nonReentrant`
   * function is not supported. It is possible to prevent this from happening
   * by making the `nonReentrant` function external, and make it call a
   * `private` function that does the actual work.
   */
  modifier nonReentrant() {
    // On the first call to nonReentrant, _notEntered will be true
    require(_status != _ENTERED, 'ReentrancyGuard: reentrant call');

    // Any calls to nonReentrant after this point will fail
    _status = _ENTERED;

    _;

    // By storing the original value once again, a refund is triggered (see
    // https://eips.ethereum.org/EIPS/eip-2200)
    _status = _NOT_ENTERED;
  }
}

pragma solidity ^0.6.0;

interface IStrategy {
  function vault() external view returns (address);

  function want() external view returns (IERC20);

  function beforeDeposit() external;

  function deposit() external;

  function withdraw(uint256) external;

  function balanceOf() external view returns (uint256);

  function balanceOfWant() external view returns (uint256);

  function balanceOfPool() external view returns (uint256);

  function harvest() external;

  function retireStrat() external;

  function panic() external;

  function pause() external;

  function unpause() external;

  function paused() external view returns (bool);

  function unirouter() external view returns (address);
}

pragma solidity ^0.6.0;

/**
 * @dev Implementation of a vault to deposit funds for yield optimizing.
 * This is the contract that receives funds and that users interface with.
 * The yield optimizing strategy itself is implemented in a separate 'Strategy.sol' contract.
 */
contract Vault is ERC20, Ownable, ReentrancyGuard {
  using SafeERC20 for IERC20;
  using SafeMath for uint256;

  struct StratCandidate {
    address implementation;
    uint256 proposedTime;
  }

  // The last proposed strategy to switch to.
  StratCandidate public stratCandidate;
  // The strategy currently in use by the vault.
  IStrategy public strategy;
  // The minimum time it has to pass before a strat candidate can be approved.
  uint256 public immutable approvalDelay;

  event NewStratCandidate(address implementation);
  event UpgradeStrat(address implementation);

  /**
   * @dev Sets the value of {token} to the token that the vault will
   * hold as underlying value. It initializes the vault's own 'moo' token.
   * This token is minted when someone does a deposit. It is burned in order
   * to withdraw the corresponding portion of the underlying assets.
   * @param _strategy the address of the strategy.
   * @param _name the name of the vault token.
   * @param _symbol the symbol of the vault token.
   * @param _approvalDelay the delay before a new strat can be approved.
   */
  constructor(
    IStrategy _strategy,
    string memory _name,
    string memory _symbol,
    uint256 _approvalDelay
  ) public ERC20(_name, _symbol) {
    strategy = _strategy;
    approvalDelay = _approvalDelay;
  }

  function want() public view returns (IERC20) {
    return IERC20(strategy.want());
  }

  /**
   * @dev It calculates the total underlying value of {token} held by the system.
   * It takes into account the vault contract balance, the strategy contract balance
   *  and the balance deployed in other contracts as part of the strategy.
   */
  function balance() public view returns (uint256) {
    return want().balanceOf(address(this)).add(IStrategy(strategy).balanceOf());
  }

  /**
   * @dev Custom logic in here for how much the vault allows to be borrowed.
   * We return 100% of tokens for now. Under certain conditions we might
   * want to keep some of the system funds at hand in the vault, instead
   * of putting them to work.
   */
  function available() public view returns (uint256) {
    return want().balanceOf(address(this));
  }

  /**
   * @dev Function for various UIs to display the current value of one of our yield tokens.
   * Returns an uint256 with 18 decimals of how much underlying asset one vault share represents.
   */
  function getPricePerFullShare() public view returns (uint256) {
    return totalSupply() == 0 ? 1e18 : balance().mul(1e18).div(totalSupply());
  }

  /**
   * @dev A helper function to call deposit() with all the sender's funds.
   */
  function depositAll() external {
    deposit(want().balanceOf(msg.sender));
  }

  /**
   * @dev The entrypoint of funds into the system. People deposit with this function
   * into the vault. The vault is then in charge of sending funds into the strategy.
   */
  function deposit(uint256 _amount) public nonReentrant {
    strategy.beforeDeposit();

    uint256 _pool = balance();
    want().safeTransferFrom(msg.sender, address(this), _amount);
    earn();
    uint256 _after = balance();
    _amount = _after.sub(_pool); // Additional check for deflationary tokens
    uint256 shares = 0;
    if (totalSupply() == 0) {
      shares = _amount;
    } else {
      shares = (_amount.mul(totalSupply())).div(_pool);
    }
    _mint(msg.sender, shares);
  }

  /**
   * @dev Function to send funds into the strategy and put them to work. It's primarily called
   * by the vault's deposit() function.
   */
  function earn() public {
    uint256 _bal = available();
    want().safeTransfer(address(strategy), _bal);
    strategy.deposit();
  }

  /**
   * @dev A helper function to call withdraw() with all the sender's funds.
   */
  function withdrawAll() external {
    withdraw(balanceOf(msg.sender));
  }

  /**
   * @dev Function to exit the system. The vault will withdraw the required tokens
   * from the strategy and pay up the token holder. A proportional number of IOU
   * tokens are burned in the process.
   */
  function withdraw(uint256 _shares) public {
    uint256 r = (balance().mul(_shares)).div(totalSupply());
    _burn(msg.sender, _shares);

    uint256 b = want().balanceOf(address(this));
    if (b < r) {
      uint256 _withdraw = r.sub(b);
      strategy.withdraw(_withdraw);
      uint256 _after = want().balanceOf(address(this));
      uint256 _diff = _after.sub(b);
      if (_diff < _withdraw) {
        r = b.add(_diff);
      }
    }

    want().safeTransfer(msg.sender, r);
  }

  /**
   * @dev Sets the candidate for the new strat to use with this vault.
   * @param _implementation The address of the candidate strategy.
   */
  function proposeStrat(address _implementation) public onlyOwner {
    require(
      address(this) == IStrategy(_implementation).vault(),
      'Proposal not valid for this Vault'
    );
    stratCandidate = StratCandidate({
      implementation: _implementation,
      proposedTime: block.timestamp
    });

    emit NewStratCandidate(_implementation);
  }

  /**
   * @dev It switches the active strat for the strat candidate. After upgrading, the
   * candidate implementation is set to the 0x00 address, and proposedTime to a time
   * happening in +100 years for safety.
   */

  function upgradeStrat() public onlyOwner {
    require(stratCandidate.implementation != address(0), 'There is no candidate');
    require(
      stratCandidate.proposedTime.add(approvalDelay) < block.timestamp,
      'Delay has not passed'
    );

    emit UpgradeStrat(stratCandidate.implementation);

    strategy.retireStrat();
    strategy = IStrategy(stratCandidate.implementation);
    stratCandidate.implementation = address(0);
    stratCandidate.proposedTime = 5000000000;

    earn();
  }

  /**
   * @dev Rescues random funds stuck that the strat can't handle.
   * @param _token address of the token to rescue.
   */
  function inCaseTokensGetStuck(address _token) external onlyOwner {
    require(_token != address(want()), '!token');

    uint256 amount = IERC20(_token).balanceOf(address(this));
    IERC20(_token).safeTransfer(msg.sender, amount);
  }
}